MIL-STD-810H Rain (Method 506.6) Test Chamber.

MIL-STD-810HIEC 60529

Mobile MIL-STD-810H Method 506.6 rain test chamber. The test item is placed inside an AISI 304 stainless enclosure (internal volume up to ~2.5 × 2.5 × 2.5 m) and exposed to Procedure I (blowing rain), II (exaggerated) and III (drip) — singly or combined — under PLC/HMI control with real-time pressure, flow and temperature logging.

Applicable StandardMIL-STD-810G/H Method 506.6

Test ProceduresI (Blowing Rain), II (Exaggerated), III (Drip) — single or combined

Enclosure MaterialAISI 304 Stainless Steel, 1.5 mm

Internal Volume≤ 2.5 × 2.5 × 2.5 m

Control SystemPLC + HMI Touch Panel

Measured ParametersPressure (bar), Flow (m³/h), Temperature (°C)

Request quote →Talk to an engineer

/ 01

Standards
& methods.

Rain Test Chambers

StandardReference

MIL-STD-810HEnvironmental Engineering Considerations and Laboratory Tests

IEC 60529Degrees of Protection Provided by Enclosures (IP Code)

Beyond the catalogue

ULMEKA engineers test systems
to specification.

If your requirement is outside this catalogue — custom chamber sizes, combined-standard integration, or tailored test profiles — talk to our engineering team.

Talk to an engineer →

/ 02